Latch Type Hall Sensor AH3075
  • Latch Type Hall Sensor AH3075
  • Latch Type Hall Sensor AH3075
  • Latch Type Hall Sensor AH3075
Latch Type Hall Sensor AH3075 Latch Type Hall Sensor AH3075 Latch Type Hall Sensor AH3075

Latch Type Hall Sensor AH3075

    ◆ Features

    Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;

    Operating temperature range: -55℃ ~ 150℃;

    Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA;

    Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;

    Small temperature drift between operating point and release point;

    No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;

    Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements.


◆ Outline

When the “ S” pole of magnet faces the mark surface of the sensor and is closed to sensor(B>Brp),the sensor outputs low level; When the “N” pole faces the mark surface and is closed to sensor (B<Bop),the sensor outputs high level. When the magnet is far away from the sensor (B=0), the output status of the sensor is latched and remains constant. In order to change the output status, the applied magnetic field must be opposite polarity. The magnet and electric transfer characteristic curve of AH3075 is shown as the figure:


◆ Block Diagram


Hall sensor AH3075 is one of bipolar excitation single-ended digital output Hall IC. The output signal owns latch function. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and open collector output driver circuit unit. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.

◆ Limit Parameter

Storage Temp.Ts-55175
Supply VoltageVCC3.528V
Output Cut-off VoltageVO(off)25V
Magnetic InductionBunlimitedunlimitedmT
Output CurrentIO50mA

◆ Electrostatic Grade

Under human being mode, the Electrostatic compression is large than ±6kV.

◆ Operating Condition

Supply VoltageVCC4.524V
Operating Temp.Ta-55150
Output CurrentIO8mA

◆ Electrical Characteristic

ParameterSymbolTest Condition    Typ.       Max. Unit
Output    Low levelVOLVCC1=4.5, VCC2=24V, IO=25mA,BBOP0.20.4V
Output    High LevelVOHVCC1=4.5, VCC2=24V, IO=25mA,B≤BRP23.524V
Output Leakage Current  IOHVCC2=24V,VCC1 Open    Circuit0.110μA
Supply    CurrentICCVCC1=24VVoOpen Circuit3.58mA
Output    Rise Edge TimetRVCC1=VCC2=12V,
     RL=1.2kΩ,    CL=20pF
Output    Fall Edge TimetF6080ns

◆ Magnetic Characteristic

Test condition:VCC1 = VCC2 =24V,IO = 50mA

Operate PointBOP810
Release PointBRP-10-8
     ∣Operate Point –Release Point∣

Note 1: Unit is mt, 1mt=10Gs.

Note 2: When the “S”Pole of the magnetic field is vertical to the front mark of product, we call the magnetic field B>0.

◆ Package Outline

SOT23-3L Package figure(Unit: mm)


SOT-89 Package figure(Unit: mm)


TO-92UA/TO-92S Package figure(Unit: mm)


Note: In the package outline, Pin1 is Vcc, Pin2: GND, Pin3: output terminal.



Mark “XX”or “AHXX” are abbreviation form of parts No.    

Contact Us
  • Tel: +86 25 8467 0370 / +86 25 8460 9021
  • E-mail:
  • Fax: +86 25 8467 0370
  • Add: Room 201-1, Bldg B, 33, Dongqi Road, Jiangning District, Nanjing, China, 211103
Follow Us

Copyright © Nanjing AH Electronic Science & Technology Co., Ltd. All Rights Reserved

Technical Support:      | Sitemap |